10 September 2018
EWS GERMANY: ULTRA-SCAN FOR LVL, MDF, PARTICLEBOARD, OSB & PLYWOOD
Blow Detection System ULTRA-SCAN on very thick and low density boards. For a blow detection ultrasound penetrates the boards continuously. If the signal has a big drop on the receiver side a blow will be displayed. The thicker the board and the lower the density the earlier the system limitation is reached.
Thanks to a so-called “Power-Sonic-Resonance” method this limit of the ULTRA-SCAN measuring system is expanded considerably.
The ULTRA-SCAN systems can be equipped with thickness function easily. No problem to inspect very thick or low density boards.
ULTRA-SCAN can do it. A “Power-Sonic-Resonance” method is used. By the use of contact rolls sonic transmitters and sonic receivers always float in a constant distance to the board surface. So the transmitted signal is in resonance with the sonic which is reflected from the board surface. This results in an extensive increase of the sound penetration. So, very thick and low density boards can be inspected.
The system's contact rolls and frame also can be used for thickness measurement at reasonable additional cost.
For more information contact Mrs Hauke Kleinschmidt:
EWS: Electornic Wood Systems GmbH
Robert Henseling Strasse 1
D-31789 HAMELN / Germany
Ph. +49 5151 55740